亿家智宝官方论坛

 找回密码
 立即注册
搜索
热搜: 活动 交友 discuz
查看: 1138|回复: 0

Matebot description of program burning

[复制链接]

1

主题

1

帖子

37

积分

超级版主

Rank: 8Rank: 8

积分
37
发表于 2018-9-26 16:44:07 | 显示全部楼层 |阅读模式
本帖最后由 ekasbo 于 2018-9-26 16:48 编辑

一、Burning preparation
1Get burning software, download ROM package. The urlhttps://pan.baidu.com/s/1QRg8ldb29e4EU3CGkwHf6w
2Download the baking software: PhoenixSuit. Reference site:https://androidmtk.com/download-phoenixsuit or baidu to download (suggest install V1.0.6 version).
二、Burning way
When burning system, use USB port to burn.
三、Burning operation
1Equipment preparationaShut down the devicebRemove the back cover after removing the 4 holes and internal screws on the back shell of the device head.
2Open the burner software PhoenixSuit and enter the one-click swipe machine interface.
3Click to browse and select the file you want to burn (the file with the suffix img).
4Press the red UBOOT button in the board and plug the USB cable connected to the computer into the USB OTG at the top left of the board, then release it at the same time.
5After the board enters the burning state, the computer recognizes that it will pop up a pop-up box to see if it is formatted, and clicks "yes" twice.
6、Enter the burning state, indicating "firmware burned successfully", and then click "ok" to indicate that the system burned successfully.

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?立即注册

x
回复

使用道具 举报

*滑块验证:
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|手机版|小黑屋|Ekasbo Inc.  

GMT+8, 2019-8-26 04:34 , Processed in 0.108727 second(s), 19 queries .

Powered by Discuz! X3.4

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表